ZU-061-05
Accelerator Bar, Bristle Blaster® 11 mm (Pack of 5)
Bristle Blaster® accelerator bar, steel, 11 mm — pack of 5. Compatible with 11 mm carbon-steel br...
Surface Preparation Tools
Surface Preparation Tools & Consumables
The complete MontiPower range from Malaysia's official Monti Group supplier. Bristle Blaster®, MBX®, and Vinyl Zapper® drive units, belts, and accessories. German-engineered, Malaysian stocked, trusted across the toughest industries.
Why MontiPower
One System, Every Surface Challenge
Across every tool below, the MontiPower approach delivers controlled, grit-free surface preparation.
Grit-Free
Results comparable to abrasive blasting — without loose abrasives, dust, or containment.
Substrate-Safe
Removes corrosion and coatings without damaging the base material.
Malaysian Stock
Held locally for fast despatch across Malaysia and Southeast Asia.
30+ Years Proven
German-engineered technology trusted by industry since 1987.
67 products
ZU-063-05
Accelerator Bar, Bristle Blaster® 11 mm, Stainless Steel (Pack of 5)
Bristle Blaster® accelerator bar, stainless steel — pack of 5. Compatible with 11 mm stainless-st...
ZU-060-05
Accelerator Bar, Bristle Blaster® 23 mm (Pack of 5)
Bristle Blaster® accelerator bar, steel, 23 mm — pack of 5. Compatible with carbon-steel brushes.
ZU-062-05
Accelerator Bar, Bristle Blaster® 23 mm, Stainless Steel (Pack of 5)
Bristle Blaster® accelerator bar, stainless steel, 23 mm — pack of 5. Compatible with 23 mm stain...
ZU-068-05
Accelerator Bar, Bristle Blaster® Double (Pack of 5)
Bristle Blaster® accelerator bar, steel, 46 mm — pack of 5. Keep spares on hand for the double ma...
ZU-68-01
Accelerator Bar, Bristle Blaster® Double — Carbon Steel
Bristle Blaster® accelerator bar, steel, 46 mm. Drives higher, more consistent bristle impact on ...
ZU-69-01
Accelerator Bar, Bristle Blaster® Double — Stainless Steel
Bristle Blaster® accelerator bar, steel, 46 mm. Drives higher, more consistent bristle impact on ...
ZU-086
Adjustable Grip for Bristle Blaster®
Work longer with less fatigue. This adjustable grip improves ergonomics and lets you set the idea...
SDB-601-BMC
Bristle Blaster® Axial Pneumatic Kit
Patented accelerator bar. Tight-access power. 75% faster prep.The Bristle Blaster® Axial is purpo...
BB-103-01
Bristle Blaster® Belt, Stainless Steel, Red, 11 mm
The 11 mm stainless-steel Bristle Blaster® belt — 0.7 mm wire with angled, sharpened tips, built ...
BB-102-01
Bristle Blaster® Belt, Stainless Steel, Red, 23 mm
The 23 mm stainless-steel Bristle Blaster® belt — 0.7 mm wire with angled, sharpened tips. Suitab...
BB-034-01
Bristle Blaster® Belt, Steel, Red, 11 mm
The 11 mm carbon-steel Bristle Blaster® belt — 0.7 mm wire with angled, sharpened tips, designed ...
BB-033-01
Bristle Blaster® Belt, Steel, Red, 23 mm
The 23 mm carbon-steel Bristle Blaster® belt — 0.7 mm wire with angled, sharpened tips.Built on a...
SB-700-BMC
Bristle Blaster® Cordless Kit — with CAS 5.5Ah Battery & Fast Charger
Everything you need to go cordless — battery and charger included.The patented Cordless Bristle B...
SB-701-BMC
Bristle Blaster® Cordless Kit — Without Battery or Charger
All the power of the Bristle Blaster® — now without the cable.The patented Cordless Bristle Blast...
SB-799
Bristle Blaster® Cordless — Machine Only (No Battery or Charger)
The cordless Bristle Blaster® drive unit, ready for your CAS battery platform.Battery-powered too...
SE-1261-BMC
Bristle Blaster® Electric Kit 230V, 50–60Hz, 910W
Coating-ready surfaces, every time — straight out of the case.This complete 230V electric kit pai...
SP-701-W-BMC
Bristle Blaster® Pneumatic Double Kit
Twice the contact width for faster coverage.A complete pneumatic double kit, ready to prep wider ...
SP-647-BMC
Bristle Blaster® Pneumatic Kit
A complete pneumatic setup for both 11 mm and 23 mm work.Everything you need to run the Bristle B...
SP-699
Bristle Blaster® Pneumatic — Machine Only
The Bristle Blaster® Pneumatic drive unit, supplied on its own and packed in a cardboard box. Add...
ZU-028
Bristle Blaster® Protective Guard — Double
The original protective cover for double Bristle Blaster® machines. Genuine fit, reliable protect...
ZU-029
Bristle Blaster® Protective Guard — Single
The original protective cover for single Bristle Blaster® machines. Compatible with both cordless...
37015-2
Carbon Brush Set for Bristle Blaster® and MBX®
Restore full motor performance with a fresh set of carbon brushes for your 900W machines (2 piece...
AS-001
Decapower Drill Adapter for Brushes — 43 mm System, 4 Segments
Mount Decapower brushes to any drill. This 4-segment adapter (43 mm system) accepts a range of br...
Need Help Choosing?
Talk to Our Technical Team
Not sure which tool is right for your application? Our Malaysia-based team can recommend the best solution for your surface preparation challenge.
Malaysian stock — fast despatch
Technical support included