Bristle Blaster® Range

Bristle Blaster® Surface Preparation Tools

Surface preparation comparable to abrasive blasting, cleanliness comparable to ISO 8501-1 Sa2 ½ & Sa3 and a defined anchor profile in a single pass, anywhere grit blasting is impractical, expensive, or prohibited.

Learn how the Bristle Blaster® works

Aggressive Removal

Removes heavy corrosion, scale, and coatings — results comparable to abrasive blasting.

Sa2 ½ & Sa3 Cleanliness

Coating-ready cleanliness and a 65–85 µm Rz anchor profile in one operation.

No Containment

No loose abrasive media — minimal dust and no costly containment.

ATEX Available

Pneumatic models are ATEX-approved for explosive atmospheres.

12 products

SDB-601-BMC

Bristle Blaster® Axial Pneumatic Kit

Patented accelerator bar. Tight-access power. 75% faster prep.The Bristle Blaster® Axial is purpo...

BB-103-01

Bristle Blaster® Belt, Stainless Steel, Red, 11 mm

The 11 mm stainless-steel Bristle Blaster® belt — 0.7 mm wire with angled, sharpened tips, built ...

BB-102-01

Bristle Blaster® Belt, Stainless Steel, Red, 23 mm

The 23 mm stainless-steel Bristle Blaster® belt — 0.7 mm wire with angled, sharpened tips. Suitab...

BB-034-01

Bristle Blaster® Belt, Steel, Red, 11 mm

The 11 mm carbon-steel Bristle Blaster® belt — 0.7 mm wire with angled, sharpened tips, designed ...

BB-033-01

Bristle Blaster® Belt, Steel, Red, 23 mm

The 23 mm carbon-steel Bristle Blaster® belt — 0.7 mm wire with angled, sharpened tips.Built on a...

SB-701-BMC

Bristle Blaster® Cordless Kit — Without Battery or Charger

All the power of the Bristle Blaster® — now without the cable.The patented Cordless Bristle Blast...

SB-799

Bristle Blaster® Cordless — Machine Only (No Battery or Charger)

The cordless Bristle Blaster® drive unit, ready for your CAS battery platform.Battery-powered too...

SE-1261-BMC

Bristle Blaster® Electric Kit 230V, 50–60Hz, 910W

Coating-ready surfaces, every time — straight out of the case.This complete 230V electric kit pai...

SP-701-W-BMC

Bristle Blaster® Pneumatic Double Kit

Twice the contact width for faster coverage.A complete pneumatic double kit, ready to prep wider ...

SP-647-BMC

Bristle Blaster® Pneumatic Kit

A complete pneumatic setup for both 11 mm and 23 mm work.Everything you need to run the Bristle B...

SP-699

Bristle Blaster® Pneumatic — Machine Only

The Bristle Blaster® Pneumatic drive unit, supplied on its own and packed in a cardboard box. Add...

Bristle Blaster® Set Ultimate Pneumatic set - Double (SP-801-W-BMC)

Take surface preparation to the next level with the Bristle Blaster® Ultimate Pneumatic Set – Dou...

Need Help Choosing?

Which Bristle Blaster® Is Right for You?

From pneumatic to cordless to axial, our technical team can match the right drive unit and belt to your job. Not sure on belts? Try the Belt Selector.

Malaysian stock — fast despatch

Technical support included